Bathroom Remodel Plumbing • Local to Sherwood
Bathroom Remodel Plumbing in Sherwood, OR
Venne Plumbing provides bathroom remodel plumbing in Sherwood and the Portland metro area. From new showers and tubs to toilets, faucets, and bidets, our family owned team helps you create a bathroom that both looks beautiful and works the way it should.
Plumbing for the Bathroom You’ve Been Imagining
We work with homeowners and contractors to make sure what’s behind the tile is as solid as what you see.
- Custom showers, tubs, and valve layouts
- Toilet, faucet, and bidet rough-in & trim
- Permits pulled & inspections scheduled
Prefer to talk? Call our office at (503) 624-9309.
A great bathroom remodel is more than tile and pretty fixtures—it’s also smart plumbing design, correct rough-in measurements, and code-compliant installation so everything works the way it should for years to come. As your local Sherwood plumber, we’re used to working in real homes with real families, not just showrooms.
Our team includes father–daughter plumbers Ryan and Emma, journeyman plumbers Peter and Garson, and apprentices Zach and Brad. We always pull the required plumbing permits and schedule inspections, and we coordinate with your contractor or work directly with you, depending on how you’re running your project.
Bathroom Remodel Plumbing We Provide
From moving drains to setting the final fixtures, we handle every plumbing step of your bathroom remodel—with permits and inspections taken care of.
- New shower valve and head locations – standard, dual-head, rain heads, and handhelds.
- Shower pan and drain connections – working with your shower system and waterproofing plan.
- Tub and freestanding tub plumbing – deck-mount, wall-mount, and freestanding tub fillers.
- Toilet rough-in and replacement – standard, comfort-height, skirted, and in-wall tank systems.
- Vanity and sink plumbing – single or double vanities, under-mount, vessel, and wall-mount sinks.
- Bidet toilets and bidet seat connections – water supply and shutoff valves for electric and non-electric seats.
- Vent and drain adjustments – layout changes to match your new design while staying within code.
Working With Homeowners, Designers & Contractors
We fit into the way you’re running your project—whether you’re working with a GC, a designer, or managing the remodel yourself.
For Homeowners
- Help reviewing fixture options so everything works together and meets code.
- Clear communication about what’s needed before rough-in and before trim.
- Honest feedback if a layout or fixture choice may cause issues down the road.
For Contractors & Designers
- Coordination of rough-in heights, niche locations, and valve placements.
- Plan and spec review for plumbing-related details before walls are closed.
- Professional, tidy crews that respect your schedule and your client’s home.
Help With Layout & Fixture Choices
Not sure which valve, drain, or tub filler to pick? We can help you choose fixtures that look good and work well in the real world.
- Advice on shower valve types (pressure-balance vs. thermostatic) and what fits your budget.
- Rough-in guidance for niches, benches, and glass so plumbing and tile line up.
- Ideas for where to locate handheld showers and shutoffs so they’re actually easy to use.
- Recommendations for toilets, faucets, and drains we’ve seen hold up over time.
- Tips on what to think about if you might want a bidet seat now or in the future.
Our Bathroom Remodel Plumbing Process
Clear steps from first conversation to final walkthrough, designed to keep your project moving and your plumbing inspected and approved.
- 1. Conversation & estimate – You share your plans, inspiration, and any drawings. We talk through plumbing needs and provide an estimate.
- 2. Rough-in phase – We move or add drains, vents, and water lines to match the new layout, and set shower valves and tub supplies.
- 3. Permits, inspection & close-up – We pull the required plumbing permits, schedule the inspection, meet the inspector when needed, and make any adjustments before walls and tile go in.
- 4. Trim phase – We set toilets, faucets, shower trim, tub fillers, and connect sinks once the finishes are in place.
- 5. Final walkthrough – We test everything with you, check for leaks, and make sure the bathroom is ready for everyday use.
Where We Work & Bathroom Remodel FAQs
Based in Sherwood, we help with bathroom remodel plumbing across the southwest Portland metro.
We regularly work in Sherwood, Tualatin, Tigard, Newberg, Wilsonville, Beaverton, and nearby communities. If you’re just outside that area, reach out and we’ll let you know if we can help with your bathroom project.
Can you help me choose bathroom plumbing fixtures?
Yes. We’re happy to recommend toilets, faucets, valves, and drains that we’ve seen work well in real homes. You can bring us ideas and links, and we’ll help you avoid combinations that cause problems or don’t meet code.
Do you work directly with my contractor or designer?
Absolutely. We often coordinate with general contractors, tile installers, and designers to make sure plumbing rough-ins match the final design. If you’re managing the project yourself, we’ll walk you through what’s needed at each step.
Do you handle plumbing permits and inspections?
Yes. For bathroom remodels that require permits, we pull the plumbing permit, schedule inspections, and make any adjustments the inspector requests. You don’t have to navigate that process on your own.
Can you install a bidet or bidet seat in my new bathroom?
Yes. We install bidet toilets and bidet seats regularly. We can rough in the correct water supply and shutoff locations and talk through what’s needed if you’re planning an electric bidet seat.
How do I get started?
The easiest way to get started is to contact us online with a few details about your bathroom remodel or give us a call at (503) 624-9309. We’ll talk through your project and next steps.